0113 RF Generator

0113 RF Generator is 120 Watts RF Power at 13.56 MHz for Industrial and Laboratory Applications.

PDF DOWNLOADS:

 
 

STANDARD FEATURES

  • 13.56 MHz up to 120 Watts
  • Low harmonic level at 100W h2< -50 dBc, h3 and higher < -50 dBc
  • Metering by analog output, measures forward, reflected power simultaneously
  • External Remote Control of Generator's Basic Functions
  • Data acquisition: Status Monitoring & Power Measurement at Analog Port
  • Optional RS232, RS 485 and USB communication: Full Control Of Generator/Amplifier Functions
  • AGC Power Leveling: Output Power Control to better than ± 1.5W of set value.
  • RF Burst (Pulse) Operation

     

    SPECIFICATIONS

    DESCRIPTION RANGE/CHARACTERISTIC
    Class of Operation Class B
    Frequency of Operation / Frequency Stability
    13.56 MHz default / 0.005%
    RF Power Output 120 Watts into 50 Ohm
    Output(as amplifier) in MGC/Burst Mode 0 dBm IN, 1V CTL IN pin 5 100W ±2W
    RF Input Drive(as amplifier) Typical range -20 dBm to 0dBm, 1V CTL IN pin 5
    RF Input Drive for AGC Recommended +0 to +3 dBm for the best operation
    Input Drive Source(amplifier) Signal or function generator, analog computer input capable of up to 2 Vp-p @ 50 Ohm
    Internal RF Source Crystal oscillator at 13.56 MHz
    Input and Output Impedance
    50 Ohm
    Input VSWR 1.2:1 max
    Output VSWR 3:1 max
    Output VSWR Protection 50W max reflected power limit. Automatic, limits typically within 0.5 ms after reverse power reaches 50W or power amplifier current preset limit.
    Harmonic level @ 100W
    Better than - 50 dBc for 2-nd harmonic, any other > -50 dBc
    Spurious Output - 50 dBc equivalent noise level generated by internal circuits
    Output Blanking T&C amplifiers and generators offer blanking of the output signal for minimum noise RF spectrum
    Dynamic Power Range 0 to 120W, settings within +/- 2W
    Output Settings & Control (Communications) Basic model: SubD 25 Analog and Digital I/O.
    Port Power scale 1V=100W, 5V and 10V. Rear Panel. D-Comm model: SubD 25 plus RS232,485 and USB.

    RF Burst (pulse) Specifications

    Pulse Width from 2 microseconds to continuous, user defined, rising and falling edges less than 1 microseconds.
    Power Margin > 50%
    RF Input / Output connectors

    INPUT BNC Female
    OUTPUT N Female
    BLANKING BNC Female
    Rear Panel

    AC Power Source 100 - 240 VAC, +/-10%, 47 - 63 Hz,
    broad input voltage with no adjustment required.
    AC Power connection IEC Standard Power Entry followed by RFI filter. Filter range 0.1 to 30 MHz min.
    AC Circuit Protection Internally fused on the main DC Power Supply, 6.5A
    AC Input Current (RMS) I<4.5A @ 115V/I< 2A @ 220V
    Cooling Forced air, temperature controlled heatsink temperature monitored for equipment safety at 70C limit.
    Dimensions (with hardware) H135mm x W211mm x L356mm ( 5.25” H x 8.3” x 14” )
    Weight 7 kg, 15.4 lbs.
    Mounting Half Rack, 3U high. Optional: Rack Mount Kit, Adapter Kit, Coupling Screws.
    Environmental conditions Temperature: 10° to 40° C ambient air
    Humidity: 80%
    Equipment intended for ISM applications in laboratory and light industrial environment.
 
About T&C | Plasma Systems | AG Amplifiers | ULTRA Amplifiers LA Amplifiers HV GenerarorsContact | Careers
 RF SystemsRF Specials | Application Notes | Software Downloads | Doing Business With Us | Site map

hosting, serwer agencja reklamowa, web design, flash
PolskaNoc.pl Wroc³aw Poznań Warszawa Eragon wino