| DESCRIPTION |
RANGE/CHARACTERISTIC |
| Class of Operation |
Class B |
| Frequency of Operation
/ Frequency Stability |
380 kHz default / 0.005%
|
| RF Power Output |
550 Watts into
50 Ohm |
| Output(as amplifier)
in MGC/Burst Mode |
0 dBm IN, 1V (5
or 10V) CTL IN pin 5 100W ±2W |
| RF Input Drive(as amplifier) |
Typical range -20 dBm to 0dBm,
1V (5 or 10V) CTL IN pin 5 |
| RF Input Drive for AGC |
Recommended +0 to +3 dBm for
the best operation |
| Input Drive Source(amplifier) |
Signal or function
generator, analog computer input capable of up to 2 Vp-p
@ 50 Ohm |
| Internal RF Source |
Crystal oscillator
at 380 kHz +/-5 kHz |
- Input and Output Impedance
|
50 Ohm |
| Input VSWR |
1.2:1 max |
| Output VSWR |
3:1 max |
| Output VSWR Protection |
80W max reflected
power limit. Automatic, limits typically within 0.5 ms
after reverse power reaches 80W or power amplifier current
preset limit. |
Harmonic level @ 550W
|
Better than - 40 dBc |
| Spurious Output |
- 50 dBc |
| Output Blanking |
For pulsed applications,
T&C amplifiers and generators offer blanking of the
output signal for minimum noise RF spectrum |
| Dynamic Power Range |
1 to 550W, settings
within +/- 5W |
| Output Settings &
Control (Communications) |
SubD 25 Analog
and Digital I/O.
Port Power scale 1V=100W. Rear Panel |
| Pulse Specifications |
Pulse Width from
2 mu to continues, user defined |
| Power Margin |
20% |
| RF Input / Output connectors |
INPUT BNC Female
OUTPUT N Female
BLANKING BNC Female
Rear Panel
|
| AC Power
Source |
20120 VAC, +/-10%,
47 - 63 Hz,
broad input voltage with no adjustment required. |
| AC Power connection |
IEC Standard Power
Entry followed by RFI filter. Filter range 0.1 to 30 MHz
min. |
| AC Circuit Protection |
Internally fused on the main
DC Power Supply, 15A |
| AC Input Current (RMS) |
RF Out 600W:
120 VAC -1 max. =12A,
200 to 240V -1 max. =7A |
| Cooling |
Forced air, temperature controlled
heatsink temperature monitored for equipment safety at
70C limit. |
| Dimensions (with hardware) |
H135mm x W211mm x L356mm ( 5.25”
H x 8.3” x 14” ) |
| Weight |
7 kg, 15.4 lbs. |
| Mounting |
Half Rack, 3U high.
Optional: Rack Mount Kit, Adapter Kit, Coupling Screws. |
| Environmental conditions |
Temperature: 10°
to 35° C ambient air
Humidity: 80%
Equipment intended for ISM applications in laboratory
and light industrial environment. |
