| DESCRIPTION |
RANGE/CHARACTERISTIC |
| Class of Operation |
Class C |
| Frequency of Operation
/ Frequency Stability |
13.56 MHz default / 0.005%
|
| RF Power Output |
1200 Watts into
50 Ohm |
| Output(as amplifier)
in MGC/Burst Mode |
0 dBm IN, 10V CTL
IN pin 5 1200W ±12W |
| RF Input Drive for AGC |
Recommended +0 to +3 dBm for
the best operation |
| Input Drive Source(amplifier) |
Signal or function
generator, analog computer input capable of up to 2 Vp-p
@ 50 Ohm |
| Internal RF Source |
Crystal oscillator
at 13.56 MHz |
- Input and Output Impedance
|
50 Ohm |
| Input VSWR |
1.2:1 max |
| Output VSWR |
3:1 max |
| Output VSWR Protection |
240 W max reflected
power limit. Automatic foldback limit with [W] level of
protection depending on actual VSWR of a load connected. |
Harmonic level @ 550W
|
Better than - 40 dBc for 2-nd
harmonic, any other > -50 dBc |
| Spurious Output |
- 55 dBm equivalent noise level
generated by internal circuits |
| Output Blanking |
For pulsed applications,
T&C amplifiers and generators offer blanking of the
output signal for minimum noise RF spectrum |
| Dynamic Power Range |
3 to 1200W, settings
within +/- 12W |
| Output Settings &
Control (Communications) |
SubD 25 Analog
and Digital I/O.
Port Power scale 1V=100W. Rear Panel |
| Pulse Specifications |
Pulse Width from
2 mu to continues, user defined |
| Power Margin |
25% |
| RF Input / Output
connectors |
INPUT BNC Female
OUTPUT N Female
BLANKING BNC Female
Digital I/O (optional): RS232, USB2 and RS485
|
| AC Power
Source |
200 - 240 VAC, +/-10%;
40 - 60 Hz, +/-10%
(100 to 120 VAC operation possible at up to 50% output
level) |
| AC Power connection |
Permanently attached
line cord with plug (meeting safety requirements of the
region where equipment will be operating). PFC of 95%
at 230 VAC. |
| AC Circuit Protection |
BAck Panel Circuit Breaker,
10A |
| AC Input Current (RMS) |
RF Out 1200W: I<9A @ 220V |
| Cooling |
Water cooled and forced air,
heatsink temperature monitored for equipment safety at
70C limit. |
| Water Inlet and Outlet |
The connection provided accepts
a 1/4-inch NPT male pipe thread. |
| Dimensions (with hardware) |
H135mm x W212mm x L482mm ( 5.25”
H x8.3” x 19” ) |
| Weight |
14 kg, 31 lbs. |
| Mounting |
1/2" Rack,
3U high. Optional: Rack Mount Kit, Adapter Kit, Coupling
Screws. |
| Environmental conditions |
Temperature: 10°
to 35° C ambient air
Humidity: 80%
Equipment intended for ISM applications in laboratory
and light industrial environment. |
