| DESCRIPTION |
RANGE/CHARACTERISTIC |
| Class of Operation |
Class C (bipolar
end stages reflecting technological drop-in replacements) |
| Frequency of
Operation |
13.56 MHz |
| RF Power Output |
Up to 1250 W max,
50 Ohm load Other loads within FWD and REV power limits. |
| Gain |
62 dB @ 1200W +/-0.5
MHz |
| RF Power Input
Drive |
Typical range -20 dBm to 0 dBm,
+5 dBm max |
| RF Power Input
Drive for AGC |
Recommended -3
dBm to 0 dBm for +/-0.3 dB gain flatness |
| Input Drive
Source |
Signal or function
generator, analog computer output capable of up to 1 Vp-p
@ 50 Ohm (+5dBm) |
| Internal RF
Source |
DDS oscillator:
20 kHz to 6 MHz, 1 kHz resolution |
-
Input and Output Impedance
|
50 Ohm Input
2:1 MAX INPUT VSWR
3:1 max OUTPUT VSWR |
| Output VSWR
Protection |
200 W max. reflected
power limit |
| Harmonic level
@ 750 W |
Better then - 45 dBc for any
harmonic |
| Spurious Output |
-50 dBc |
| RF Output Settings
& Control |
-Front Panel EDITOR
and function switches for manual control,
-RS232 port for GUI or other computer communication. Rear
Panel
-SubD 25 Analog and Digital I/O. Port power scale 1V=100W.
Rear Panel. |
| RF Power Meter
accuracy |
+/-3% typical |
| Output Blanking |
For pulsed applications,
T&C amplifiers and generators may offer blanking of
the output signal for minimum RF spectrum noise. Less
than 1 mu Rise/Fall time. |
| BURST |
Internal settings:
Pulse range: 1 to 500 usec
Period: 1 to 50 milliseconds, User settings via GUI RS232
External settings: DC to >200 kHz. User defined
BURST scheme via SubD-25. See analog port description
for more details. |
| SWEEP Operation |
13.56 MHz +/-0.2MHz,
in time 10 ms, max 10s. Settings and activation from GUI
only |
| RF Connectors |
INPUT BNC Female
OUTPUT N Female
Analog Interface 25 pin; RS 232 Interface |
| AC Power Connection |
Non-detachable power cord anchored
with compression bushing followed by RFI filter. Back
Panel |
| AC Circuit Protection |
Internally fused on the main
DC Power Supply, 15A |
| AC Input Current
(RMS) |
120 V ac, 50-60 Hz, 20 A
200 - 240 V ac, 50-60 Hz, 12 A
Product Features Power Factor Correction (PFC) |
| Cooling |
Forced air, temperature controlled,
heatsink temperature monitored via RS232 GUI interface. |
| Acoustic level |
45 dBa @ Max Fan Speed @ temp. |
| Case |
Designed to meet EMI and RFI
shielding requirements AL chassis, yellow conductive finish.
Front Panel: T&C off-white. Cover: T&C black. |
| Dimensions (with
hardware) |
(H 178 x W 363 x L 388) mm (7”
x 14.25” x 15.25” )
Optional Half Rack, 3U High. |
| Weight |
25 kg, 54 lbs. |
| Mounting |
Stand alone unit.
(Optional Rack Mount Kit) |
| Environmental Conditions |
Temp: 10°C to 35°C
Humidity: 80% |
